Comparison Guide

SIP trunking vs PRI: cost, reliability, and migration compared.

If you are paying for PRI circuits, you are paying legacy prices for legacy failure modes. Here is exactly what changes when you switch, including the parts that take work.

What each one is

PRI

A Primary Rate Interface is a physical circuit delivering 23 voice channels over dedicated copper or fiber. Reliable in the way a landline is reliable, and limited in the same way.

Fixed capacity in blocks of 23 channels
Dedicated circuit to rent
PRI card and hardware to maintain
Down until a truck arrives when cut
Recommended for most
SIP trunking
Voice over your internet connection instead of a dedicated circuit.
Capacity per channel, the day you ask
Encryption with TLS and SRTP
Automatic failover when a path fails
Flat-rate calling, no per-minute overages

The savings range, explained.

PRI pricing carries the circuit, the hardware maintenance, and per-minute long distance. SIP replaces all three: no dedicated circuit to rent, no PRI card to maintain, flat-rate calling with no per-minute overages for standard usage. Across our migrations, organizations moving off PRI typically cut 30 to 40 percent from their monthly voice spend.

The failover difference.

When a PRI circuit is cut, your phones are down until a truck arrives. When a SIP path fails, calls reroute in seconds to a backup path, another site, or mobile phones.

The honest caveat: SIP depends on your internet connection, so we assess bandwidth first and architect secondary paths where continuity is critical. A SIP deployment is only as good as its engineering, which is why ours starts with a network assessment.

Capacity and scale

PRI scales in blocks of 23 channels, so you buy a whole new circuit for the 24th call. SIP scales one channel at a time, the day you ask. Seasonal businesses, schools, and campaigns stop paying for empty capacity.

What migration actually involves

Your existing phones usually work with SIP, so hardware replacement is the exception, not the rule. One client put it this way: our SIP conversion from legacy PRI finished on schedule and on budget.

Switch without downtime

The reason organizations stay on aging phone systems is fear of the cutover. Here is how we remove it.

Network Assessment

We map your current lines, numbers, and call flows.

Migration Plan

You get a written plan with dates, owners, and a rollback path.

Parallel Testing

The new system runs alongside your old one until it proves itself.

Go Live

Numbers port on schedule. Your callers notice nothing.

24/7 Support

US-based engineers monitor and answer from day one.

When PRI still makes sense

Almost never for new deployments, but the list is short and real: sites with no reliable internet path, and contracts with early termination costs that outweigh year-one savings. We will tell you if you are in either group.

Frequently
Asked Questions

Yes. Numbers port to the SIP trunks on a scheduled date, and callers never notice.

Usually not. Most existing systems connect to SIP trunks through a gateway or are already SIP-capable.
Varies by site count and porting complexity. The plan we write gives you real dates, and parallel testing means the cutover itself is a non-event.

Find out your number.

Send us a recent PRI invoice. We will show you the year-one savings and the migration plan, and if PRI is still right for you, we will say so.

● We respond within 1 Business Day

Request Your
Custom Quote

Tell us about your setup and we will build a plan around it.

Contact Form (Leave this Default Form - it has settings configured)

We never sell your information. See our Privacy Policy.

Why organizations choose Intuity

Scroll to Top